Log Home Packages & Kits
Pricing provided below.

There are 2 main types of log homes available:
We offer both types at competitive prices.
We also offer a full construction service anywhere in North America. All log packages include a 50 yr. warranty
Handcrafted Log Packages

Whether you are planning on building a Scandinavian full-scribe, timber dove-tail or Post & Beam home, we can build it!
Packages Available:
- Logs only package pricing starts at $50/sq.ft. of finished floor area
- Weathertight shell package pricing starts at $75/sq.ft. of finished floor area
Note: Interior finishings are available as well
![]()
Handcrafted log package includes:
- construction drawings/plans
- emseal base gasket
- avg. 16” pine logs full length
- with Scandinavian full scribe construction (corners & grooves)
- post & beam / timber frame roof system
- post & beam / timber frame second floor system
- emseal gasket for interior & exterior of log wall
- rock wool insulation for the grooves & corners
- 2 x material for window & door buck frames, installed & ready to accept your windows & doors
- required drilling for electrical / thru-bolts
- set-up of log shell/roof system/floor system on your property
- delivery of log package to your property.
NOTE: Crane rental for set-up is not included. (approximately 2 days needed)
Handcrafted Weathertight Shell package includes:
Windows & Doors (Westwood)
- Casement windows with 10” flush (cedar or fir) frame, Low-E & Argon thermal glass & insect screens
- Solid (cedar or fir) entrance doors with 6-9/16 flush pine frame, Low-E & Argon thermal glass
- Windows/Doors are all pre-finished with a stain of choice
Second floor system
- 8×8 pine timber support posts
- 8×12 pine timber main beam
- 6×10 pine timber joists
- screw jacks for 8×8 posts
- 2×6 t&g red pine decking
Gable Ends
- 2×6 spruce framing – plates & studs
- emseal gasket for wall-roofsystem/post/log wall connection
- 1/2” OSB sheathing
- typar housewrap & sheathing tape
- 1×4” spruce strapping for siding
- 1×6” cedar bevel siding
Roof System
- 2×10” spruce rafters & hurricane ties
- 5/8″ t&g plywood
- ice-water shield/tar paper
- 50yr. steel roofing
- required flashings & roof vents
Soffit/Fascia
- 1×6” pine t&g v-joint soffit
- aluminum vent strips
- 1×8” & 1×6” cedar for step-fascia
- 1×4” spruce backing for step-fascia
Exterior Trim
- 1×7” cedar trim above windows & doors
- 1×5” cedar trim for sides & bottoms of windows & doors
Milled Log Packages
We have 3 profiles to choose from: Timber Dove-tail, Round, & D-Log



Our milled logs are the most authentic & energy efficient ones available in eastern North America today.

Our milled logs:
- are full length (which is a good thing!)
- are available with a hand-peeled or smooth finish
- are used with an energy-star approved gasket system
- are naturally air-dried

Packages Available:
- Logs only package pricing starts at $30/sq.ft. of finished floor area
- Weathertight shell package pricing starts at $50/sq.ft. of finished floor area
Note: Interior finishings are available as well
Milled log package includes:
- construction drawings/plans
- emseal base gasket
- 10” milled pine logs full length, NO BUTT JOINTS!
- with round corner notch
- with Swedish cope for the groove, NO TONGUE & GROOVE!
- with hand-peeled logs
- post & beam roof system with full length avg. 12-16” logs for support beams
- post & beam / timber frame second floor system
- emseal gasket for interior & exterior of log wall
- log boss fasteners
- 2 x 10 for window & door buck frames + flashing for professional window seal
- required drilling for electrical / thru-bolts.
- includes set-up of log shell/roof system/floor system on your property
- includes delivery of log package to your property.
- d-log & timber dovetail log profiles are available as well
![]()
Crane rental for set-up is not included with your price.
8”, 9”, 12” 14” & 16” logs are also available upon request. Prices will be adjusted accordingly.
Milled Weathertight Shell package includes:
- Milled Log shell
Windows & Doors (Jeldwen)
- Casement windows with 4-5/8” flush pine frame, Low-E & Argon thermal glass & insect screens
- Aluminum Clad steel insulated entrance doors with 6-9/16 flush pine frame, Low-E & Argon thermal glass

Second floor system
- 8×8 pine timber support posts
- 8×12 pine timber main beam
- 6×10 pine timber joists
- screw jacks for 8×8 posts
- 2×6 t&g red pine decking

Gable Ends
- 2×6 spruce framing – plates & studs
- emseal gasket for wall-roofsystem/post/log wall connection
- 1/2” OSB sheathing
- typar housewrap & sheathing tape
- 1×4” spruce strapping for siding
- 1×6” pine t&g v-joint siding

Roof System
- 2×10” spruce rafters & hurricane ties
- 1/2” OSB sheathing
- ice-water shield/tar paper
- 25yr. asphalt shingles-required flashings & roof vents

Soffit/Fascia
- 1×6” pine t&g v-joint siding
- aluminum vent strips
- 1×8” & 1×6” cedar for step-fascia
- 1×4” spruce backing for step-fascia

Exterior Trim
- 1×6” cedar trim above windows & doors
- 1×4” cedar trim for sides & bottoms of windows & doors
- flashing for windows & doors
